can i swipe card in denmark when we use 201 chip+pin system ? could i cashout with 101 dumps + pin if i found an old atm? , and last which dumps (country) would be most effective in denmark including method? Thank you in advance 
Help with dumps in Denmark? i'll pay you for your help :))
- Thread starter kasper2
- Start date
Hello.
I answer your questions:
1. Cloned cards with a magnetic stripe with dump + pin data recorded on them can be cashed in any modern ATM.
2. Cloned cards with a magnetic stripe without a chip with dump + pin data recorded on them can only be withdrawn in old ATM machines.
You can also cash out cloned cards with a pin in any pos-terminal by making various purchases with them, and then reselling them at a cheaper price in shares, stores or private sellers.
To write to blank cards with a magnetic stripe, you can use dumps of any country, but it is important for you to take into account an important circumstance - they must be without regional blocking, otherwise you will not be able to use them and cash out in your country!
Europe dumps work best for your country.
It is even better to record the dumps of the home country in which you will cash them. But keep in mind that this is very dangerous, since you are withdrawing money from cardholders in your own country.
All ATMs have the function of recording who withdraws money and can keep a record for up to a year, but usually no more than 1 month. It depends on the security settings and the ATM model.
Do not try to visit ATMs on your own in order to cash out cards, but best of all send a drop (a dummy) to this task and control his actions from a distance.
It is not advisable to have direct contacts with the drop, but it is better to work remotely so that he does not know the exact data about you.
I answer your questions:
1. Cloned cards with a magnetic stripe with dump + pin data recorded on them can be cashed in any modern ATM.
2. Cloned cards with a magnetic stripe without a chip with dump + pin data recorded on them can only be withdrawn in old ATM machines.
You can also cash out cloned cards with a pin in any pos-terminal by making various purchases with them, and then reselling them at a cheaper price in shares, stores or private sellers.
To write to blank cards with a magnetic stripe, you can use dumps of any country, but it is important for you to take into account an important circumstance - they must be without regional blocking, otherwise you will not be able to use them and cash out in your country!
Europe dumps work best for your country.
It is even better to record the dumps of the home country in which you will cash them. But keep in mind that this is very dangerous, since you are withdrawing money from cardholders in your own country.
All ATMs have the function of recording who withdraws money and can keep a record for up to a year, but usually no more than 1 month. It depends on the security settings and the ATM model.
Do not try to visit ATMs on your own in order to cash out cards, but best of all send a drop (a dummy) to this task and control his actions from a distance.
It is not advisable to have direct contacts with the drop, but it is better to work remotely so that he does not know the exact data about you.
I appreciate your quick answer, not everyday you find quality info. Got some more question i you don't mind?
i'm most likely getting dumps without pin as 95% of dump + pin is scam. EU countries use chip+pin so i guess it wouldn't work to swipe them instore as it would request a pin.
Isn't my only option using 101 dumps as they use signature when im swiping, but would it request a pin as 201?
which 101 dump countries (USA ect.) works best in EU As long as i find bins without region block?
Regarding ATM cashout, is there a specific older model that would ignore the chip and only allow magnetic stripe, as i know most atm in EU are modern and most use chip.
In Denmark swiping/dumps never had exposure in the media or the news, hence the reason thought it was impossible to do.
i'm most likely getting dumps without pin as 95% of dump + pin is scam. EU countries use chip+pin so i guess it wouldn't work to swipe them instore as it would request a pin.
Isn't my only option using 101 dumps as they use signature when im swiping, but would it request a pin as 201?
which 101 dump countries (USA ect.) works best in EU As long as i find bins without region block?
Regarding ATM cashout, is there a specific older model that would ignore the chip and only allow magnetic stripe, as i know most atm in EU are modern and most use chip.
In Denmark swiping/dumps never had exposure in the media or the news, hence the reason thought it was impossible to do.
I only know of 4 reliable stores that sell dump + pin.
One of them is on this forum, you can find his contacts at this link:
101 dump is very similar to 201 dump, but the difference is that 201 dump asks for compliance with the card chip, that is, it cannot be used without writing the appropriate chip.
In order to write a blank card with a chip, it is necessary to use the appropriate software that can generate and create it correctly.
101 dump can be written with pin and use it successfully.
201 dump can be recorded with a pin, but if the blank of the magnetic card is without pins, it is necessary to write the authorization for chip emulation, so that when you put this card in a pos-terminal or ATM, he would receive the answer that the chip is present, although in fact it will not be. There are sellers of such software on private forums.
Therefore, it is easiest to work with 101 dump + pin or 101 dump without pin. But then the difficulty will arise that not all ATMs and pos-terminals will accept it for processing.
You can also just buy Java card blanks, which already come with a chip, and write 101 or 201 dumps on them. When recording, it is necessary to generate a chip card key in the EMV software (detailed guides on how to correctly record track2 + pin are on this forum).
Yes, 101 and 201 US dumps without regional blocking will work well in Europe at certain types of ATMs and POS terminals.
Old models of bakery are hard to find, but many of them still work.
For example, my friends posted ads for the purchase of old models of ATMs at a high price, when representatives of various banks began to write to them, they simply asked where their ATM was located and whether it was connected to work. They asked for the exact address because they wanted to test it.
Thus, they found more than 30 ATMs, this number was quite enough for them to work.
Therefore, buy Java blanks that already come with a chip and you will avoid problems finding old ATM models.
One of them is on this forum, you can find his contacts at this link:
101 dump is very similar to 201 dump, but the difference is that 201 dump asks for compliance with the card chip, that is, it cannot be used without writing the appropriate chip.
In order to write a blank card with a chip, it is necessary to use the appropriate software that can generate and create it correctly.
101 dump can be written with pin and use it successfully.
201 dump can be recorded with a pin, but if the blank of the magnetic card is without pins, it is necessary to write the authorization for chip emulation, so that when you put this card in a pos-terminal or ATM, he would receive the answer that the chip is present, although in fact it will not be. There are sellers of such software on private forums.
Therefore, it is easiest to work with 101 dump + pin or 101 dump without pin. But then the difficulty will arise that not all ATMs and pos-terminals will accept it for processing.
You can also just buy Java card blanks, which already come with a chip, and write 101 or 201 dumps on them. When recording, it is necessary to generate a chip card key in the EMV software (detailed guides on how to correctly record track2 + pin are on this forum).
Yes, 101 and 201 US dumps without regional blocking will work well in Europe at certain types of ATMs and POS terminals.
Old models of bakery are hard to find, but many of them still work.
For example, my friends posted ads for the purchase of old models of ATMs at a high price, when representatives of various banks began to write to them, they simply asked where their ATM was located and whether it was connected to work. They asked for the exact address because they wanted to test it.
Thus, they found more than 30 ATMs, this number was quite enough for them to work.
Therefore, buy Java blanks that already come with a chip and you will avoid problems finding old ATM models.
